Nieuwegein

NBC Congress Centre, Blokhoeve 1, Nieuwegein, Netherlands, 3438 LC

The NBC Congress Center is a family business and you notice this by our involvement. Our employees work hard to provide our guests with a perfect meeting. In the preparation we think along with you and during your meeting we take over the operational matters. This way you can focus on your meeting. The NBC Congress Center has been a family business since 1992. In practice, it means that we are a strong team with little turnover. In total, more than 140 enthusiastic employees work at the NBC Conference Center that are ready for you every day. No day is the same here, we go very far for our guests. That means thinking along in the preparation, not taking a challenge out of the way and being involved with our guests and their meetings. Curious about our team? Access by public transport From Jaarbeursplein Utrecht you take the express tram to Nieuwegein - Zuid or IJsselstein. These leave every 7 minutes. After about 15 minutes you get off at the Zuilenstein stop. You cross the road immediately and the NBC Congress Center is right in front of you. You can not miss the striking orange tower. Free parking with own transport The NBC is strategically located near the A2, A12 and A27 in the heart of the Netherlands. The NBC has 1,200 free parking spaces and 2 E-Charge points

Subcategories (3)

Category for 3D Graphics

3D Graphics
Category for Animation

Animation
Category for GPU

GPU

Explore Our Courses

GPU Programming with OpenACC

 28 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to use OpenACC to program heterogeneous devices and exploit their parallelism. By the end of this training, participants will be able to:
  • Set up an OpenACC development environment.
  • Write and run a basic OpenACC program.
  • Annotate code with OpenACC directives and clauses.
  • Use OpenACC API and libraries.
  • Profile, debug, and optimize OpenACC programs.
Read more...

Introduction to GPU Programming

 21 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to learn the basics of GPU programming and the main frameworks and tools for developing GPU applications.
  • By the end of this training, participants will be able to:
    Understand the difference between CPU and GPU computing and the benefits and challenges of GPU programming.
  • Choose the right framework and tool for their GPU application.
  • Create a basic GPU program that performs vector addition using one or more of the frameworks and tools.
  • Use the respective APIs, languages, and libraries to query device information, allocate and deallocate device memory, copy data between host and device, launch kernels, and synchronize threads.
  • Use the respective memory spaces, such as global, local, constant, and private, to optimize data transfers and memory accesses.
  • Use the respective execution models, such as work-items, work-groups, threads, blocks, and grids, to control the parallelism.
  • Debug and test GPU programs using tools such as CodeXL, CUDA-GDB, CUDA-MEMCHECK, and NVIDIA Nsight.
  • Optimize GPU programs using techniques such as coalescing, caching, prefetching, and profiling.
Read more...

GPU Programming - OpenCL vs CUDA vs ROCm

 28 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to use different frameworks for GPU programming and compare their features, performance, and compatibility. By the end of this training, participants will be able to:
  • Set up a development environment that includes OpenCL SDK, CUDA Toolkit, ROCm Platform, a device that supports OpenCL, CUDA, or ROCm, and Visual Studio Code.
  • Create a basic GPU program that performs vector addition using OpenCL, CUDA, and ROCm, and compare the syntax, structure, and execution of each framework.
  • Use the respective APIs to query device information, allocate and deallocate device memory, copy data between host and device, launch kernels, and synchronize threads.
  • Use the respective languages to write kernels that execute on the device and manipulate data.
  • Use the respective built-in functions, variables, and libraries to perform common tasks and operations.
  • Use the respective memory spaces, such as global, local, constant, and private, to optimize data transfers and memory accesses.
  • Use the respective execution models to control the threads, blocks, and grids that define the parallelism.
  • Debug and test GPU programs using tools such as CodeXL, CUDA-GDB, CUDA-MEMCHECK, and NVIDIA Nsight.
  • Optimize GPU programs using techniques such as coalescing, caching, prefetching, and profiling.
Read more...

Blender: 3D Modeling Fundamentals - Part 2

 14 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at artists, game developers, or complete beginners who wish to use Blender to create 3D models for interactive applications, video games, animated films, etc. By the end of this training, participants will be able to:
  • Learn how to create animations and visual effects with Blender.
  • Add curves, surfaces, metaballs, and hair particles to simulate realistic 3D motions.
  • Introduction to non-destructive modelling and animation.
  • Export 3D models and assets to a game engine, 3D printer, or other software.
Read more...

ROCm for Windows

 21 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to install and use ROCm on Windows to program AMD GPUs and exploit their parallelism. By the end of this training, participants will be able to:
  • Set up a development environment that includes ROCm Platform, a AMD GPU, and Visual Studio Code on Windows.
  • Create a basic ROCm program that performs vector addition on the GPU and retrieves the results from the GPU memory.
  • Use ROCm API to query device information, allocate and deallocate device memory, copy data between host and device, launch kernels, and synchronize threads.
  • Use HIP language to write kernels that execute on the GPU and manipulate data.
  • Use HIP built-in functions, variables, and libraries to perform common tasks and operations.
  • Use ROCm and HIP memory spaces, such as global, shared, constant, and local, to optimize data transfers and memory accesses.
  • Use ROCm and HIP execution models to control the threads, blocks, and grids that define the parallelism.
  • Debug and test ROCm and HIP programs using tools such as ROCm Debugger and ROCm Profiler.
  • Optimize ROCm and HIP programs using techniques such as coalescing, caching, prefetching, and profiling.
Read more...

AMD GPU Programming

 28 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to use ROCm and HIP to program AMD GPUs and exploit their parallelism. By the end of this training, participants will be able to:
  • Set up a development environment that includes ROCm Platform, a AMD GPU, and Visual Studio Code.
  • Create a basic ROCm program that performs vector addition on the GPU and retrieves the results from the GPU memory.
  • Use ROCm API to query device information, allocate and deallocate device memory, copy data between host and device, launch kernels, and synchronize threads.
  • Use HIP language to write kernels that execute on the GPU and manipulate data.
  • Use HIP built-in functions, variables, and libraries to perform common tasks and operations.
  • Use ROCm and HIP memory spaces, such as global, shared, constant, and local, to optimize data transfers and memory accesses.
  • Use ROCm and HIP execution models to control the threads, blocks, and grids that define the parallelism.
  • Debug and test ROCm and HIP programs using tools such as ROCm Debugger and ROCm Profiler.
  • Optimize ROCm and HIP programs using techniques such as coalescing, caching, prefetching, and profiling.
Read more...

Blender: 3D Modeling Fundamentals - Part 1

 21 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at artists, game developers, or complete beginners who wish to use Blender to create 3D models for interactive applications, video games, animated films, etc. By the end of this training, participants will be able to:
  • Understand the principles and core concepts of 3D modeling.
  • Explore a variety of modes and tools for modeling and editing 3D meshes.
  • Use the tools for UV mapping/unwrapping, sculpting, and painting 3D models renderring.
Read more...

Adobe Animate: Basics to Advanced

 21 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level graphic designers and animators who wish to learn how to create stunning animations, interactive media, and engaging web content using Adobe Animate. By the end of this training, participants will be able to:
  • Navigate the Adobe Animate interface and tools.
  • Create and edit animations using keyframes, motion tweens, and shape tweens.
  • Design interactive animations and applications with ActionScript and JavaScript.
  • Incorporate audio and video elements into projects.
  • Export animations for web, video, and mobile platforms.
Read more...

GPU Programming with CUDA

 28 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to use CUDA to program NVIDIA GPUs and exploit their parallelism. By the end of this training, participants will be able to:
  • Set up a development environment that includes CUDA Toolkit, a NVIDIA GPU, and Visual Studio Code.
  • Create a basic CUDA program that performs vector addition on the GPU and retrieves the results from the GPU memory.
  • Use CUDA API to query device information, allocate and deallocate device memory, copy data between host and device, launch kernels, and synchronize threads.
  • Use CUDA C/C++ language to write kernels that execute on the GPU and manipulate data.
  • Use CUDA built-in functions, variables, and libraries to perform common tasks and operations.
  • Use CUDA memory spaces, such as global, shared, constant, and local, to optimize data transfers and memory accesses.
  • Use CUDA execution model to control the threads, blocks, and grids that define the parallelism.
  • Debug and test CUDA programs using tools such as CUDA-GDB, CUDA-MEMCHECK, and NVIDIA Nsight.
  • Optimize CUDA programs using techniques such as coalescing, caching, prefetching, and profiling.
97% de clients satisfaits. 
Read more...

Blender: 3D Modeling Fundamentals

 35 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at artists, game developers, or complete beginners who wish to use Blender to create 3D models for interactive applications, video games, animated films, etc. By the end of this training, participants will be able to:
  • Understand the principles and core concepts of 3D modeling.
  • Explore a variety of modes and tools for modeling and editing 3D meshes.
  • Learn how to create animations and visual effects with Blender.
  • Add curves, surfaces, metaballs, and hair particles to simulate realistic 3D motions.
  • Use the tools for UV mapping/unwrapping, sculpting, and painting 3D models.
  • Export 3D models and assets to a game engine, 3D printer, or other software. 
Read more...

Administration of CUDA

 35 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level system administrators and IT professionals who wish to install, configure, manage, and troubleshoot CUDA environments. By the end of this training, participants will be able to:
  • Understand the architecture, components, and capabilities of CUDA.
  • Install and configure CUDA environments.
  • Manage and optimize CUDA resources.
  • Debug and troubleshoot common CUDA issues.
Read more...

GPU Programming with OpenCL

 28 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers who wish to use OpenCL to program heterogeneous devices and exploit their parallelism. By the end of this training, participants will be able to:
  • Set up a development environment that includes OpenCL SDK, a device that supports OpenCL, and Visual Studio Code.
  • Create a basic OpenCL program that performs vector addition on the device and retrieves the results from the device memory.
  • Use OpenCL API to query device information, create contexts, command queues, buffers, kernels, and events.
  • Use OpenCL C language to write kernels that execute on the device and manipulate data.
  • Use OpenCL built-in functions, extensions, and libraries to perform common tasks and operations.
  • Use OpenCL host and device memory models to optimize data transfers and memory accesses.
  • Use OpenCL execution model to control the work-items, work-groups, and ND-ranges.
  • Debug and test OpenCL programs using tools such as CodeXL, Intel VTune, and NVIDIA Nsight.
  • Optimize OpenCL programs using techniques such as vectorization, loop unrolling, local memory, and profiling.
Read more...

OpenSCAD: Introduction to 3D Modeling

 21 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at designers, mechanical engineers, and anyone who wishes to learn how to create 3D models that can be constructed or 3D printed. By the end of this training, participants will be able to:
  • Create printable 3D models.
  • Use geometric transformations to build complex 3D shapes.
  • Model in a non-interactive manner using minimal lines of code.
Read more...

Autodesk Fusion 360

 21 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to advanced-level 3D design and 3D printing enthusiasts who wish to use Fusion 360 to design, simulate, and prepare models for 3D printing. By the end of this training, participants will be able to:
  • Install and configure Fusion 360 for optimal performance.
  • Design, model, and simulate 3D objects in a unified environment.
  • Optimize and prepare designs for the 3D printing process.
  • Collaborate and share their designs using Fusion 360's cloud capabilities.
Read more...

Graphic techniques (Adobe Photoshop, Corel Draw)

 28 Hours
What you will learn during the training:
  • principles of creating computer graphics and desktop publishing
  • ways of defining and working with color
  • differences between vector and bitmap graphics
  • ways to customize color photos and graphics
  • principles of retouching and creating photomontages
  • create your own illustrations and graphics
  • entrusted to adapt to the needs of graphic material composition and printing
  • how to do logo and logos
  • create interesting charts and tables
  • create business cards and letterhead
  • creating labels, diplomas, invitations
  • preparation of leaflets
  • how to format text
  • use of spot colors
  • principles of preparing to print
  • digital printing, offset printing, screen printing
Sample topics of classes:
  • my poster
  • portrait
  • expanse
  • my catalog
  • my face
  • billboard
  • my logo
Read more...

Adobe LiveCycle Designer

 14 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at beginner-level to intermediate-level developers and UI/UX designers who wish to use Adobe LiveCycle Designer to create interactive and dynamic PDF forms. By the end of this training, participants will be able to:
  • Create and edit PDF forms with various elements and properties.
  • Add scripts and logic to PDF forms using JavaScript.
  • Validate and secure PDF forms.
  • Integrate PDF forms with data sources and web services.
  • Deploy and distribute PDF forms.
Read more...

Affinity Designer

 14 Hours
This course is perfect for those who want to start their graphic design journey using Affinity Designer, one of the most popular and versatile vector graphics programs. If you are new to computer graphics and are looking for a solid foundation, this course will help you master the basic features and tools that are essential for creating professional designs, step by step.During the course:You will learn how to navigate the Affinity Designer interface, which will allow you to use its features with ease.You will learn the basic tools for drawing and editing shapes, which will allow you to create your own illustrations and graphics.You will understand how to work with layers and how to use colors and text in your designs.You will master the basics of exporting your designs to different formats, ready for printing or publishing online.After completing the course, you will be able to create simple graphics, logos, posters, and other visual materials using Affinity Designer tools. The course will provide you with a solid foundation that will allow you to further develop your graphic design skills.
Read more...

Adobe Illustrator

 14 Hours
The participant will learn during the training:
  • use a vector graphics program.
  • create simple objects
  • creating advanced curves
  • create a logo
  • tracing elements created on paper or photograph
  • receipt of leaflets
  • advertising posters
  • open and modify documents and PDF vector, EPS
Read more...

Create an Augmented Reality (AR) Mobile Application with ARToolKit

 7 Hours
ARToolKit is an open-source tracking library for creating Augmented Reality (AR) applications. It supports Windows, Linux, Mac, Android and iOS. In this instructor-led, live training, participants will learn how to build an augmented reality mobile application with ARToolKit. By the end of this training, participants will be able to:
  • Develop a mobile application that overlays virtual imagery onto the real world
  • Preprocess video to adjust lighting and resolve issues
  • Integrate ARToolKit with third-party tools and functionality, including OpenCV, Unity, OpenSceneGraph and the mobile device's GPS, compass, and camera calibration utilities
Format of the Course
  • Interactive lecture and discussion.
  • Lots of exercises and practice.
  • Hands-on implementation in a live-lab environment.
Course Customization Options
  • The mobile application developed in this course can be target Android and/or iOS. To request your preference, please contact us to arrange.
Read more...

CorelDraw Rozszerzony

 21 Hours
During the 3-day training, participants will learn some history of the theory and guidelines transformed into sample projects: "Tracing" from a drawing on paper to a vector image that can be used for printing, cutting, engraving, etc. "Pierre Bézier Curves" rules for creating basic curves and compound curves as well as editing and repairing. "Typography" creating your own font from drawing to obtaining an open type font (OTF) file.
Read more...

GPU Programming with CUDA and Python

 14 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at intermediate-level developers who wish to use CUDA to build Python applications that run in parallel on NVIDIA GPUs. By the end of this training, participants will be able to:
  • Use the Numba compiler to accelerate Python applications running on NVIDIA GPUs.
  • Create, compile and launch custom CUDA kernels.
  • Manage GPU memory.
  • Convert a CPU based application into a GPU-accelerated application.
Read more...

FreeCad: Getting Started with Parametric Modeling

 21 Hours
FreeCAD is an open-source, customizable, multi-platform, scriptable and extensible parametric 3D modeler for designing real-life objects. In this instructor-led, live training, participants will learn how to model an object for later construction or 3D printing. By the end of this training, participants will be able to:
  • Use FreeCad's tools and workflows to replace commercial CAD or BIM modeling software
  • Write to many formats such as STEP, IGES, STL, SVG, DXF, OBJ, IFC, DAE, etc.
  • Use Python to extend FreeCAD's functionality
  • Automate FreeCad, build modules and embed FreeCAD into an existing application
Audience
  • Designers
  • Developers
  • Mechanical engineers
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Inkscape

 14 Hours
This course demonstrates through hands-on practice the fundamentals and applications of Inkscape.
Read more...

Learning Maya

 14 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at web designers who wish to use Maya for creating 3D animations. By the end of this training, participants will be able to:
  • Create realistic models and textures in Maya.
  • Animate and render projects for high quality playback.
  • Simulate natural effects like water and smoke.
Read more...

NVIDIA GPU Programming - Extended

 21 Hours
This instructor-led, live training course in Nieuwegein covers how to program GPUs for parallel computing, how to use various platforms, how to work with the CUDA platform and its features, and how to perform various optimization techniques using CUDA. Some of the applications include deep learning, analytics, image processing and engineering applications.
Read more...

WebGL: Create an Animated 3D Application

 21 Hours
WebGL (Web Graphics Library) is a JavaScript API for rendering 3D graphics within a web browser without the use of plug-ins. In this instructor-led, live training, participants will learn how to generate realistic computer images using 3D graphics as they step through the creation of an animated 3D application that runs in a browser. By the end of this training, participants will be able to:
  • Understand and use WebGL's various functionality, including meshes, transforms, cameras, materials, lighting, and animation
  • Animate objects with WebGL
  • Create 3D objects using WebGL
Audience
  • Developers
Format of the course
  • Part lecture, part discussion, exercises and heavy hands-on practice
Read more...

Pixar USD (Universal Scene Description) Fundamentals

 7 Hours
This instructor-led, live training in Nieuwegein (online or onsite) is aimed at design engineers, architects, and developers who wish to use Pixar USD to create, build, and share common 3D scenes or assets while working simultaneously from different graphics tools. By the end of this training, participants will be able to:
  • Set up the necessary development environment to start building 3D graphics and workflows.
  • Understand the basic USD composition and apply modifications to enhance 3D assets and scenes.     
  • Share, combine, and transform multiple assets using the supported USD plugins for 3rd party applications (Maya, Katana, and Houdini).
Read more...

Graphic techniques (Adobe Photoshop, Adobe Illustrator)

 28 Hours
Graphics programs Adobe is a set of tools for creating, editing and manipulating graphics, multimedia and documents. Adobe Systems is known for creating many professional programs dedicated to graphics, multimedia, photo editing, website design and more. Here are some of the main graphics programs created by Adobe: Adobe Photoshop Jest is one of the most popular raster graphics editing programs. It allows you to manipulate photos, create graphics, retouch, color correction and many other advanced operations. Adobe Illustrator Focused on vector graphics, Illustrator lets you create logos, illustrations, vector graphics, typographic designs, and more that can be scaled without losing quality.
Read more...

Last Updated:

Testimonials (4)

Very interactive with various examples, with a good progression in complexity between the start and the end of the training.

Jenny - Andheo

Course - GPU Programming with CUDA and Python

Learning about the software

Peter - Coleg Cambria

Course - Blender: 3D Modeling Fundamentals

Trainers energy and humor.

Tadeusz Kaluba - Nokia Solutions and Networks Sp. z o.o.

Course - NVIDIA GPU Programming - Extended

The trainer really targeted our need to a very specific case study and was able to adapt to the situation (as the solutions to our problematic evolved during the course), beyond the upstream preparation he did.

Anne-Sophie Schwindenhammer

Course - Inkscape

Provisional Upcoming Courses (Contact Us For More Information)

GPU Programming with CUDA

2025-06-16 09:30
28 hours
Nieuwegein

Affinity Designer

2025-06-30 09:30
14 hours
Nieuwegein

OpenSCAD: Introduction to 3D Modeling

2025-07-14 09:30
21 hours
Nieuwegein

Blender: 3D Modeling Fundamentals

2025-07-28 09:30
35 hours
Nieuwegein

Introduction to GPU Programming

2025-08-11 09:30
21 hours
Nieuwegein

Other regions in the Netherlands

Other Countries

These courses are also available in other countries
Online Computer Graphics training in Nieuwegein, Computer Graphics training courses in Nieuwegein, Weekend Computer Graphics courses in Nieuwegein, Evening Computer Graphics training in Nieuwegein, Computer Graphics instructor-led in Nieuwegein, Online Computer Graphics training in Nieuwegein, Computer Graphics instructor-led in Nieuwegein, Weekend Computer Graphics training in Nieuwegein, Computer Graphics coaching in Nieuwegein, Computer Graphics trainer in Nieuwegein, Computer Graphics instructor in Nieuwegein, Computer Graphics private courses in Nieuwegein, Computer Graphics one on one training in Nieuwegein, Computer Graphics boot camp in Nieuwegein, Computer Graphics on-site in Nieuwegein, Computer Graphics classes in Nieuwegein, Evening Computer Graphics courses in Nieuwegein